Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 7 — Commands
52 ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
Example:
N 
b10,20,C,1EC,x4,Y12,B,p40,210,0,F,“(01)938123456789
01|(10)ABCD123456(410)3898765432108”

P
EAN/UCC Command Example
b - Data Matrix
Purpose: The following Data Matrix specific options should append the
general part of the two-dimensional code command indicated by
the italicized characters, see “b - Two-Dimensional Bar Codes,
General Part” on page 48 for more information.
Syntax: bp
1
,p
2
,p
3
,[P
4
,“DATA”]
Example:
N 
b40,80,D,5,”123456789012345678901234567890123456789
0123456789012345678901234567890
12345678901234567890”

P1 
Data Matrix Command Example
(01)93812345678901
(10)ABCD123456(410)3898765432108
b Data Matrix Command Parameter Descriptions
Parameter Description
P
4
Narrow bar from 1-15
“DATA” Represents a fixed data field, maximum 125
characters long

Intermec EasyCoder PC4 Specifications

General

Resolution	203 dpi
Power Requirements	100-240 VAC, 50-60 Hz
Print Method	Direct Thermal
Max Print Width	4.09 inches (104 mm)
Max Print Speed	4 inches per second
Max Print Length	39 inches
Media Type	Roll-fed, die-cut, continuous, fanfold, tags, tickets
Media Width	1.0 - 4.65 inches
Media Thickness	0.06 mm (0.00236 in) to 0.18 mm (0.00708 in)
Interface	RS-232
Memory	4 MB Flash, 8 MB SDRAM
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10 to 90% non-condensing