Intermec EasyCoder PC4 - Y - Serial Port Setup

Chapter 7 — Commands
122 ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
Example:
This example draws two boxes (A and B) on a label, see
commands below:
N 
X50,200,5,400,20 
X200,50,10,20,400 
P1 
Y - Serial Port Setup
Purpose: This command is used to establish the communication
parameters of the serial RS-232 port.
Syntax: Yp
1
,p
2
,p
3
,p
4
.
Box A
Box B
Y Command Parameter Descriptions
Parameter Description
p
1
Baud rate:
19 = 19,200 baud
96 = 9,600 baud
48 = 4,800 baud
24 = 2,400 baud
12 = 1,200 baud
p
2
Parity:
O = Odd
E = Even
N = None