Intermec EasyCoder PC4 - Memory - Memory Allocation

Chapter 7 — Commands
ESim for the PC4 and PF8 Printer Programmer’s Reference Manual 91
Example:
This example draws one white line (D) intersecting three black
lines (A-C), see commands below:
N 
LO50,100,400,20 
LO50,200,400,20 
LO50,300,400,20 
LW200,50,20,400 
P1 
Memory - Memory Allocation
Purpose: This command is used to select the memory allocation used by
the printer for data storage.
Syntax: Mp
1
Line A
Line B
Line C
Line D (the dotted lines will not be printed).
Note: This command only works with the PF8t or a printer that
has ESim version 7.00 or greater with a CF card option installed.