Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 7 — Commands
ESim for the PC4 and PF8 Printer Programmer’s Reference Manual 47
Code 128 With Manual Selection of Subset
By starting the Code 128 symbol with manual selection of subset
A, B or C, the user has complete control of composing the
symbol data output. By invoking special control characters in the
data string, it is possible to switch between subsets or other
special cases inside the symbol, as described in the next table.
String Invocation Rules
Command
Type
Text Print Bar Code Manual
Selection
C128 Bar Code C128
Auto UCC/EAN128
Command A B B B B, b
5
Parameter p
4
1A 1B 1C 1,IE
4
,1EC
5
Starts with ? Start A Start B Start C Start A, B, or C
(+FNC1)
Invocation in
String
?
Te xt
output
?
Bar code
output
?
Bar code
output
?
Bar code
output
?
Bar code
output
?
\” “ “ “ N/A
2
“
\\ \ \ \ N/A
2
\
\1 1 <FNC1> <FNC1> <FNC1> <FNC1>
\2 2 <FNC2> <FNC2> NA
2
<FNC2>
\3 3 <FNC3> <FNC3> NA
2
<FNC3>
\4 4 <FNC4> <FNC4 NA
2
<FNC4>
\A A Ignore
1
<Code A> <Code A> A
\B B <Code B> Ignore
1
<Code B> B
\C C <Code C> <Code C> Ignore
1
C
\S S <Shift> <Shift> N/A
2
S
Char 06
3
Char 06 Char 06 NA
2
in
Code B
NA
2
<FNC1>

Intermec EasyCoder PC4 Specifications

General

Resolution	203 dpi
Power Requirements	100-240 VAC, 50-60 Hz
Print Method	Direct Thermal
Max Print Width	4.09 inches (104 mm)
Max Print Speed	4 inches per second
Max Print Length	39 inches
Media Type	Roll-fed, die-cut, continuous, fanfold, tags, tickets
Media Width	1.0 - 4.65 inches
Media Thickness	0.06 mm (0.00236 in) to 0.18 mm (0.00708 in)
Interface	RS-232
Memory	4 MB Flash, 8 MB SDRAM
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10 to 90% non-condensing