Chapter 7 — Commands
84 ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
i - Asian Character Spacing
Purpose: This command places an adjustable inter-character space between
Asian font characters. The inter-character spacing gets multiplied
with the text string by the horizontal and vertical multiplier
values of the selected font. For help, see “A - Printing Text” on
page 37.
Syntax: ip
1
Example:
To select 8 dot spacing between Asian characters, use the
command below:
i8
1 Character
1 Character 1 Character
1 CharacterSpacing
i Command
Parameter p
1
set to 0 (default)
i Command
Parameter p
1
set to 8 (dots)
To Next Page
Loading...
