Intermec EasyCoder PC4 - Error Types

Appendix A — Error Handling
150 ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
Error Types
Classified types of error and status codes. For details, see the
“Error Response Messages” on page 151 and the full “Error
Response Tables” on page 152.
Classifications of Error and Status Codes
Type Feature Generates Recovery
A Minor error of
command
sequence or similar.
At error reporting (command
US): Sets error on print
command and sets the orange
or red LED.
At no error reporting
(command UN): Green LED
at print command
At Error reporting (command
US): Feed key or command
Reset ^@. See also command
USA.
At no Error reporting
(command UN): No recovery
necessary, already done.
B Print stopping
error.
LED: orange or red Feed key or command Reset
^@. See also command USB.
C Paper end stopping
error.
LED: red Load new media and press the
Feed key or command reset
^@.
D Error of printing
functionality and
status.
LED: red, may blink Manual or automatic
(temperature lowered) measure
or command reset ^@.
E Status changes. No LED change No recover necessary/Delete
Label from LTS. See also
command reset ^@.
F Unrecoverable
Error.
LED: red Power Off/ON or command
reset ^@.
G Dump mode. LED: green Feed key or command reset
^@
H Pause mode. LED: blinks green and orange. Feed key or command ^B or
^C.