Intermec EasyCoder PC4 Programmer's Reference Manual

Appendix A — Error Handling
152 ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
Error Response Tables
This table lists the error responses and codes reported when
Command US is on.
Error Responses and Codes Reported When Command US Is On
Error
Code
Error
Type
Description LED Serial
Response to
Command ^ee
No error GRN
01 A Syntax error RED <NAK>01[XOFF] 01<CRLF>
02 B Object exceeds image
buffer border
ORA <NAK>02[XOFF] 02<CRLF>
03 A Data length error RED <NAK>03[XOFF] 03<CRLF>
04 A Insufficient memory to
store data
RED <NAK>04[XOFF] 04<CRLF>
05 A Memory configuration
error
RED <NAK>05[XOFF] 05<CRLF>
07 C Out of media, marked
with Pnnn = Number of
remaining labels.
RED <NAK>07[XOFF] 07<CRLF>
08 A Form or image name
duplicate.
RED <NAK>08[XOFF] 08<CRLF>
09 A Form or image not
found
RED <NAK>09[XOFF] 09<CRLF>
11 D Printhead up (cover
open)
RED <NAK>11[XOFF] 11<CRLF>
13 E LTS detection waiting,
peel pause.
- <NAK>13[XOFF] 13<CRLF>
16 A No form was retrieved
before “?<CRLF>” was
entered.
RED <NAK>16[XOFF] 16<CRLF>
17 C Out of ribbon, marked
with Rnnn = Number
of remaining labels.
RED <NAK>07Rnnn
[XOFF]
17<CRLF>
50 A Does not fit in area
specified.
RED <NAK>50[XOFF] 50<CRLF>
51 A Data length too long RED <NAK>51[XOFF] 51<CRLF>
61 D High motor
temperature
BLNK
RED
<NAK>61[XOFF] 61<CRLF>

Intermec EasyCoder PC4 Specifications

General

Resolution	203 dpi
Power Requirements	100-240 VAC, 50-60 Hz
Print Method	Direct Thermal
Max Print Width	4.09 inches (104 mm)
Max Print Speed	4 inches per second
Max Print Length	39 inches
Media Type	Roll-fed, die-cut, continuous, fanfold, tags, tickets
Media Width	1.0 - 4.65 inches
Media Thickness	0.06 mm (0.00236 in) to 0.18 mm (0.00708 in)
Interface	RS-232
Memory	4 MB Flash, 8 MB SDRAM
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10 to 90% non-condensing