Intermec EasyCoder PC4 - Page 168

Appendix A — Error Handling
ESim for the PC4 and PF8 Printer Programmer’s Reference Manual 153
This table lists the error responses and codes reported when
Command US is off.
62 D High printhead
temperature
BLNK
RED
<NAK>62[XOFF] 62<CRLF>
71 F Wait after default setup. GRN - 71<CRLF>
72 F Flashing not completed RED <NAK>72[XOFF] 72<CRLF>
73 F Download error RED <NAK>73[XOFF] 73<CRLF>
81 B Cutter jammed or not
installed.
BLNK
RED
<NAK>81[XOFF] 81<CRLF>
89 G Dump mode (after
auto-detection).
GRN <NAK>89[XOFF] 89<CRLF>
92 H Pause printing mode BLNK
GRN/ORA
<NAK>92[XOFF] 92<CRLF>
94 G Autosensing mode OFF <NAK>94[XOFF] 94<CRLF>
98 G Download mode (not
public use)
99 Other errors <NAK>99[XOFF] 99<CRLF>
Error Responses and Codes Reported When Command US Is On (continued)
Error
Code
Error
Type Description LED Serial
Response to
Command ^ee
Error Responses and Codes Reported When Command US Is Off
Error
Code
Error
Type
Description LED Serial
Response to
Command ^ee
No error GRN -
01 A Syntax error GRN - 01<CRLF>
02 B Object exceeds image buffer
border
ORA [XOFF] 02<CRLF>
03 A Data length error GRN 03<CRLF>
04 A Insufficient memory to store data GRN - 04<CRLF>
05 A Memory configuration error GRN - 05<CRLF>
07 C Out of media, marked with Pnnn
= Number of remaining labels.
RED [XOFF] 07<CRLF>
08 A Form or image name duplicate. GRN - 08<CRLF>