Javad Maxor - Page 106

4-8 Maxor Operator’s Manual www.javad.com
OPERATION
Using MinPad
4
In EIM, the STAT LED blinks seven times per cycle. Each blink could
be orange, red, or green.
• Orange – information for test unavailable.
• Green – receiver passed the test.
• Red – receiver failed the test.
1. To switch to EIM, press and quickly release (within one s
econd) the
FN key on the MinPad.
2. Watch for the delimiter double-blink. With good receiver, antenna,
and observ
ation conditions, all blinks should be
green within 15
minutes of powering on.
• Green - ok
• Orange - wait
• Red - some tests failed
3. To switch back to normal, press the FN key.