www.javad.com Maxor Operator’s Manual 4-9
OPERATION
Downloading Files to a Computer
Downloading Files to a Computer
When your measuring finishes, you can download your measuring files to a
computer for storage, post-processing, or backup. Also, the Maxor memory
holds a finite amount of files and information, so downloading the files to a
computer ensures that no files are lost.
You should download files as soon as possible after collecting data at the
jobsite. PCView provides
a File Manager to download files to your computer
and delete files from the Maxor.
1. Connect your receiver and computer. See “Connecting the Maxor and a
Computer” on page 2-9 for this procedure.
2. Start PCView.
3. On the Connection Parameters dialog box, enable RTS/CTS handshaking
(Figure 4-2).
Figure 4-2. Connection Parameters – RTS/CTS Handshaking
4. Click File->File Manager (Figure 4-3).
Figure 4-3. File->File Manager
To Next Page
Loading...
