Javad Maxor - Maxor Accessory Kit

www.javad.com Maxor Operator’s Manual 1-7
INTRODUCTION
Maxor Accessory Kit
Cables
Standard Maxor accessories include the following cables:
• Receiver-to-computer RS232 serial cable
• Receiver-to-SAE power cable
• SAE-to-SAE cable extension
•USB cable
1
• Power supply with SAE connector and power/charger cable
Software
Standard Maxor software includes:
• PCView Lite– controller software that can run on a Windows®-based
computer. Please refer to the PCVi
ew Software Manual for detailed
information on this software.
• GPS radio configuration software – for configuring the radio; such as,
"Modem-JNS" and "FieldVie
w".
Software and software manuals are also available on the JNS website
(http://www.javad.com).
The following software will also be useful for operating, caring for and
us
ing your Maxor receiver, and may be required for some applications.
• FLoader – JNS's firmware loader; available from the JNS website.
• Modem-JNS - JNS’s modem configuration software; a
vailable from the
JNS website.
• PDLCONF from Pacific Crest – firmware upgrades available from
the
Pacific Crest website (www.paccrst.com/download/upgrade.htm).
• BTCONF – JNS’s Bluetooth® module configuration program;
a
vailable from the JNS
website.
• FieldView – JNS's field data collection software; amon
g many other
functions, can be used to configure the radio-modem.
• Ensemble – JNS's post-processing software.
1. Only supplied for the Maxor with the USB option enabled.