www.javad.com Maxor Operator’s Manual 4-15
OPERATION
Loading OAFs
Loading OAFs
Javad Navigation Systems dealers provide customers with OAF files. For any
OAF related questions, E-mail JNS at options@javad.com. Please have your
receiver ID number available (see “Checking Firmware Version” on page 4-21).
1. To load a new OAF, follow steps one and two in “Checking an OAF” on
page 4-13.
2. Click Load at the bottom of the Option Manager screen (see Figure 4-9 on
page 4-14).
3. Navigate to the location of the new Option Authorization File. OAFs have
.jpo extension and are unique to each receiver (Figure 4-10).
Figure 4-10. Load OAF
4. Select the appropriate file and click Open (Figure 4-10). The new receiver
option loads onto the receiver and the Option Manager table updates.
5. When finished, click Exit on the Option Manager screen, then click File-
>Disconnect to prevent conflicts with serial port management.
To Next Page
Loading...
