4-20 Maxor Operator’s Manual www.javad.com
OPERATION
Changing Receiver Modes
4
2. Press and hold the power key for more than 8 seconds, but less than 14
seconds.
3. Release the power key wh
en both LEDs become red. When the LEDs
turn off, your receiver will be in Zero Power Mode.
4. Press the Reset key for a
bout one second to return to Normal mode.
Notice:
When the internal batteries have completely discharged
and no external power is connected, the receiver will go
into Zero Power Mode automatically to prevent the
batteries from over discharging.
To Next Page
Loading...
