B-8 Maxor Operator’s Manual www.javad.com
APPENDIX
Receiver Specifications
B
PLL/DLL setting Bandwidth, order, adjustable
Common tracking loop
setting
On/Off
, Static Mode, Bandwidth of individual PLL, Bandwidth of
common PLL
Smoothing interval Code and Carrier
WAAS/EGNOS
WAAS optional
EGNOS optional
Data Features
Formats JNS, NMEA, RTCM, CMR, BINEX
Features
Up to 20 Hz update rate for real time position and raw data (code
and carrier)
10cm co
de phase and 0.1mm carrier phase precision
RTCM SC104 version 2.1, 2.2, 2.3, and 3.0 I/O
Multiple Base RTCM
Geoid and Magnetic Variation models
RAIM
Different DATUMs support
Output of grid coordinates
CMR and CMR+ support
Memory
Internal Memory Compact flash card (not removable)
Capacity
Standard – 0 MB
512 MB (Maxor GD) or up to 1 GB (Maxor GGD), 256 MB of data
storage (Maxor GGDT)
Logging T
ime 53 hours (8 MB, 15 sec, L1/L2, 7 satellites)
Logging Interval 0.05 to 86400 seconds, depending on purchased options
PPS Output (optional)
Number of PPS ports 1
Edge Rise, Fall
Period 10 to 1000000000 ms
Offset -500000000 to 500000000 msec
Reference time GPS, GLONASS, UTC (USNO), UTC (SU)
Table B-2.
GPS Board Specifications (Continued)
To Next Page
Loading...
