www.javad.com Maxor Operator’s Manual 1-15
INTRODUCTION
Option Authorization File (OAF)
allows customers to customize and configure the Maxor according to particular
needs, thus only purchasing those options needed.
Typically, all Maxor receivers ship with a t
emporary OAF that allows
the
receiver to be used for a predetermined period of time. When the receiver is
purchased, a new OAF activates desired, purchased options permanently.
Receiver options remain intact when clearing the NVRAM or resetting the
receiver.
The OAF enables the following kinds of functions. For
a complete list of
available options and details, visi
t the JNS website (http://www.javad.com) or
consult your dealer.
• Type of signal (standard L1; optional L2)
• Memory (standard 0 MB; for Maxor-GD/GG, optional up to 512 MB for
Maxor-GGD, op
tional up to 1 GB)
• Update rate standard 1Hz (optional 5, 10, or 20 Hz)
• RTK at 1 Hz, 5 Hz, 10 Hz, and 20 Hz
• RTCM/CMR Input/Output
• Event marker
• Common Tracking
• Advanced multipath reduction
• Wide Area Augmentati
on System (WAAS)
• R
eceiver Autonomous Integrity Monitoring (RAIM)
• 1 PPS (Pulse-Per-Second; a timing signal)
To Next Page
Loading...
