Johnson Controls 100 Series User Manual

JOHNSON CONTROLS
130
FORM 100.50-NOM12
ISSUE DATE: 04/02/2019
SECTION 6 – USER INTERFACE CONTROL CENTER
PRINTER
The IPU board has the capability of being connected
though the RS-232 serial port, Port 2, to a computer
using Hyper Terminal. A NUL MODEM cable must be
used to connect the computer to the IPU board.
Setup
The computer must be connected to Port 2 of the IPU
board. Use the SERVICE key to verify that Port 2 is
configured to TERMINAL.
Press the PRINT key on the keypad. Use the down ar-
row key to set the following:
• PRINTER BAUD RATE
• PRINTER PARITY
• PRINTER STOP BITS
• PRINTER ROWS PER PAGE
These parameters must be set identical to the settings
in Hyper Terminal. In addition, the data bits must be set
to 8, and the Flow Control must be set to NONE.
To use Hyper Terminal to save a report to a file:
• Select Transfer – Transfer Text and enter a le
name to save the report in.
• On the UI, select the report you want to print. See
Report Section on page 130 to select the report.
• As the report is uploading from the IPU board to
the PC, it is displayed in the Hyper Terminal win-
dow.
• When the reports nish transferring to the le, se-
lect Transfer – Capture Text – Stop.”
• The le can then be printed from an application
such as Microsoft
®
Notepad or Word.
To use Hyper Terminal to print a report without saving
it to a file:
• Select Transfer – Capture to Printer.
• On the UI, select the report to print. See Report
Section on page 130 to select the report.
• As the report is uploading from the IPU board to
the PC, it is displayed in the Hyper Terminal win-
dow.
• After the reports nish transferring to the PC, se-
lect Transfer – Capture to Printer to send the last
page to the printer.
Report Section
Press the PRINT key and enter the password. Press
the  key. Use the left or right arrow keys to navigate
through the menu. The following reports are available
to be printed:
STATUS
UNIT DATA
COOLING
COMP SYSTEM
SUPPLY SYSTEM
HEATING
ECONOMIZER
VENTILATION
EXHAUST
SETPOINTS
PROGRAM
OPTIONS
DATE / TIME
SCHEDULE
HOURS / STARTS
SERVICE
HISTORY BUFFER 1
HISTORY BUFFER 2
HISTORY BUFFER 3
HISTORY BUFFER 4
HISTORY BUFFER 5
HISTORY BUFFER 6
HISTORY BUFFER 7
HISTORY BUFFER 8
HISTORY BUFFER 9
HISTORY BUFFER 10
RUN TEST
PRINT ALL REPORTS
After selecting the report to print, press the

key to
output the report to the PC.

Johnson Controls 100 Series Specifications

General

Brand	Johnson Controls
Model	100 Series
Category	Air Conditioner
Language	English