JOHNSON CONTROLS
3
FORM 100.50-NOM12
ISSUE DATE: 04/02/2019
CHANGEABILITY OF THIS DOCUMENT
In complying with Johnson Controls’ policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at http://cgproducts.
johnsoncontrols.com.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the equip-
ment.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
MANUAL DESCRIPTION FORM NUMBER
Shipping Damage Claims 50.15-NM
Static Pressure Probe Installation Instructions 100.50-N15
High Altitude Accessory Kit Installation Instructions 100.50-N16
Installation, Operation & Maintenance Manual 100.40-NO4
Literature Supplement (dated 706) 100.40-NO4 (LS02)
Quick Start-Up Guide 100.50-SU1
ASSOCIATED LITERATURE
To Next Page
Loading...
Need help?
General
