fasteners, two on each side of the chassis. See Figure 113 on page 233 for the stacking conguraon of
the MX10004 chassis.
Figure 113: Stacking Conguraon for Packing the MX10004 Chassis
To pack an MX10004 chassis for shipping:
1. Power down the chassis and remove the power cables. See "Remove an MX10004 Router" on page
211.
2. Remove the cables that connect the MX10004 chassis to all external devices.
3. Remove all line cards and pack them in their original shipping containers. See "Remove a Line Card
from an MX10004 Router Chassis" on page 198 and "Store a Line Card Properly" on page 193.
4. Install covers over blank slots.
Leave components that came installed in the chassis, inside the chassis. These components may
include RCBs or power supplies.
233
To Next Page
Loading...
