Juniper MX10004 - Page 29

See Figure 11 on page 19 to help idenfy the major components. See Table 4 on page 20 for the
physical specicaons of the chassis of these components.
Figure 11: Front View of the MX10004 Router
1—
RCBs
3—
Line cards
2—
Status panel
WARNING: The handles on each side of the chassis are not for liing the chassis. These
handles facilitate the ne-tune posioning of the chassis on the base brackets. Do not
use the handles to li the chassis, even when the chassis is empty. See "Mount the
Juniper Networks MX10004 Router Using the JNP10004-RMK-4POST Rack-Mount
Kit" on page 120 for instrucons about properly moving a loaded chassis.
19