Juniper MX10004 - Page 43

Table 9: Fan Tray LEDs on an MX10004 (Connued)
Name Color State Descripon
Amber Blinking An error has been detected in the fan
tray controller. Replace the fan tray
controller as soon as possible. The fan
tray controller is located behind the fan
tray above the SFBs. To maintain proper
airow through the chassis, leave the
fan tray installed in the chassis unl you
are ready to replace the fan tray
controller.
Amber Blipping Beacon is enabled.
None O The fan tray controller is not receiving
power.
SIB Status (SFB 0 status) Green On steadily The le-most SFB in the chassis is
online.
Amber Blinking An error has been detected in SFB 0.
Replace the SFB as soon as possible.
The SFB is located behind the le fan
tray and is the le-most SFB in the
chassis. To maintain proper airow
through the chassis, leave the fan tray
installed in the chassis unl you are
ready to replace the SFB.
Amber Blipping Beacon is enabled.
None O The SFB is oine.
SIB Status (SFB 1 status) Green On steadily The center SFB behind the le fan tray
is online.
33