Juniper MX10004 - Page 44

Table 9: Fan Tray LEDs on an MX10004 (Connued)
Name Color State Descripon
Amber Blinking An error has been detected in SFB 1.
Replace the SFB as soon as possible.
The SFB is located behind the le fan
tray and is the middle SFB in the group
of 3. To maintain proper airow through
the chassis, leave the fan tray installed
in the chassis unl you are ready to
replace the SFB.
None O The SFB is oine.
SIB Status (SFB 2 status) Green On steadily The right-most SFB behind the le fan
tray is online.
Amber Blinking An error has been detected in SFB 2.
Replace the SFB as soon as possible.
The SFB is located behind the le fan
tray and is the right-most SFB in the
group of 3. To maintain proper airow
through the chassis, leave the fan tray
installed in the chassis unl you are
ready to replace the SFB.
Amber Blipping Beacon is enabled.
None O The SFB is oine.
SIB Status (SFB 3 status) Green On steadily The le-most SFB behind the right fan
tray is online.
34