Juniper MX10004 - Page 70

The MX10004 Roung and Control Boards (RCBs) have various types of LED indicators. Figure 28 on
page 60 shows the LEDs on the Roung and Control Boards (JNP10K-RE1).
Figure 28: Roung and Control Board LEDs
1—
RCB status panel LEDs
3—
Clock LEDs–BITS-0, and BITS-1
2—
Solid State Disk (SSD) LEDs—DISK1 and
DISK2
Roung and Control Board Status Panel LEDs
Table 22 on page 60 describes the LEDs on the RCB status panel.
Table 22:
Roung and Control Board Status LEDs
LED Color State Descripon
PWR Green On steadily RCB is receiving adequate power.
Yellow Blinking An error is detected in the RCB.
Dark Unlit RCB is not powered up.
STS Green On steadily RCB is online and funconing correctly.
Green Blinking The beacon feature is enabled.
Yellow On steadily The RCB is boong.
Yellow Blinking An error has been detected in the RCB.
60