Juniper MX10004 - Page 73

Table 25: RJ-45 Management Port LEDs on an MX10004 Roung and Control Board (Connued)
LED Color State Descripon
Green Blinking The port speed is 100 MB.
Green On steadily The port speed is 1000 MB.
LINK Unlit O No link is established, there is a fault, or the link is down.
Green On steadily A link is established.
Blinking There is link acvity.
Yellow Blinking or ickering The beacon feature is enabled.
Table 26 on page 63 describes the SFP management port LEDs.
Table 26: SFP Management Port LED on an MX10004
Roung and Control Board
LED Color State Descripon
Link/Acvity/Status Unlit O No transceiver is present.
Green On steadily A link is established. The interface is up.
Green Blinking or ickering The beacon feature is enabled.
Yellow Blinking An error has occurred.
63