Juniper MX10004 - Page 81

Hardware features
• Fixed-conguraon line card with 10-Gbps and 1-Gbps port speeds
• Line-rate throughput of up to 480 Gbps
• Two Packet Forwarding Engines, each providing a maximum bandwidth of 240 Gbps
• EA chipset for increased scaling for bandwidth, subscribers, and services
• Supports the Switch Fabric Boards JNP10004-SF2, JNP10008-SF, JNP10008-SF2
and JNP10016-SF
•
Interoperates with the JNP10K-LC2101 and JNP10K-LC9600 line cards
•
Operates with the following Roung and Control Boards: JNP10K-RE1, JNP10K-
RE1-128, and JNP10K-RE1-LT
•
Operates with the following power supplies and fan trays:
•
JNK10K-PWR-AC or JNK10K-PWR-DC with the JNP10004-FAN2, JNP10008-
FAN or JNP10016-FAN.
• JNP10K-PWR-AC2 or JNP10K-PWR-DC2 with JNP10004-FAN2, JNP10008-
FAN2 or JNP10016-FAN2.
In both of the above conguraons, the MX10K-LC480 line card adheres to the
complete NEBS compliance (NEBS GR63-CORE, GR1089-CORE, and SR3580
compliance).
• Meets the full NEBS requirement on the MX10004, MX10008, and MX10016
routers
• Supports a maximum transmission unit (MTU) ranging from 256 bytes through
16,000 bytes for transit trac and for host-bound packets
Soware features
• Default port conguraon of 10 Gigabit Ethernet (GbE)
• Supports opcs diagnoscs and related alarms
71