Juniper MX10016 Hardware Guide

Table 36 on page 103 shows the physical specifications for an AC power supply.
Table 36: Physical Specifications for a JNP10K-PWR-AC Power Supply
ValueSpecification
3.5 in. (8.89 cm)Height
3.6 in. (9.14 cm)Width
14.4 in. (36.58 cm)Depth
6.8 lb 3.08 kg)Weight
JNP10K-PWR-AC2 Power Specifications
MX10008 and MX10016 redundant configuration routers can use either AC or DC power supplies; base
configuration routers are AC only. The JNP10K-PWR-AC2 power supply supports AC, HVAC, and HVDC.
Table 37 on page 103 lists the power specifications for the AC power supply (JNP10K-PWR-AC) used in a
MX10000 chassis.
Table 37: Power Specifications for a JNP10K-PWR-AC2 Power Supply
SpecificationsItem
180–305 VACAC input voltage
190–410 VDCDC input voltage
28.5 AInput current rating
12.3 V, 5500 W with dual feed and 5000 W with single feedDC output power
Table 38 on page 103 shows the physical specifications for a JNP10K-PWR-AC2 power supply.
Table 38: Physical Specifications for a JNP10K-PWR-AC2 Power Supply
ValueSpecification
3.5 in. (8.89 cm)Height
3.6 in. (9.14 cm)Width
103

Juniper MX10016 Specifications

General

Brand	Juniper
Model	MX10016
Category	Network Hardware
Language	English