Juniper MX10016 - Cable Specifications for Console and Management Connections; Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion

Cable Specifications for Console and Management Connections
Table 46 on page 116 lists the specifications for the cables that connect the MX10016 router to a
management device.
NOTE: The MX10016 router can be configured with SFP management ports that support
1000BASE-SX transceivers.
Table 46: Cable Specifications for Console and Management Connections for an MX10016
Device
Receptacle
Maximum
LengthCable SuppliedCable Specification
Port on
MX10016 router
RJ-457 feet
(2.13 meters)
One 7-feet (2.13-meter) long
RJ-45 patch cable and RJ-45
to DB-9 adapter
RS-232 (EIA-232) serial
cable
Console port
RJ-45328 feet
(100 meters)
One 7-feet (2.13-meter) long
RJ-45 patch cable
Category 5 cable or
equivalent suitable for
1000BASE-T operation
Management port
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion
IN THIS SECTION
Signal Loss in Multimode and Single-Mode Fiber-Optic Cables | 117
Attenuation and Dispersion in Fiber-Optic Cable | 117
116