Juniper MX10016 - JNP10 K-PWR-DC Power Specifications; JNP10 K-PWR-DC2 Power Specifications

JNP10K-PWR-DC Power Specifications
The DC power supply (JNP10K-PWR-DC) is supported only in the MX10016 redundant configuration.
Table 42 on page 112 lists the power specifications for the DC power supply used in an MX10016 chassis.
Table 42: Power Specifications for the JNP10K-PWR-DC Power Supply
SpecificationsItem
•
Minimum operating voltage: –40 VDC
•
Nominal operating voltage: –48 VDC
•
Operating voltage range: –40 VDC through –72 VDC
DC input voltage
60 A maximum at nominal operating voltage (–48 VDC) for each input
terminal
DC input current rating
2500 WOutput power
Table 43 on page 112 shows the physical specifications for a DC power supply used in an MX10016 router.
Table 43: Physical Specifications of the JNP10K-PWR-DC Power Supply
ValueSpecification
3.5 in. (8.89 cm)Height
3.6 in. (9.14 cm)Width
14.4 in. (36.58 cm)Depth
6 lb (2.72 kg)Weight
JNP10K-PWR-DC2 Power Specifications
HVDC power supplies (JNP10K-PWR-DC2) are supported in only the MX10008 and MX10016 redundant
configuration. Table 44 on page 113 lists the power specifications for the HVDC power supply used in an
MX10000 chassis.
112