Juniper MX10016 - Installing the Mounting Hardware

Table 53: MX10016 Rack-Mounting Kit
QuantityComponent
12Phillips flat-head screws, 8-32 x 375 in.
2Rear brackets
1Right base bracket
1Left base bracket
5. Compare the contents of the front panel kit with Table 54 on page 136.
Table 54: MX10016 Front Panel Kit
QuantityComponent
1Front panel
1Left base bracket
1Right base bracket
2Latch brackets
8Phillips flat-head screws
1Documentation roadmap card
SEE ALSO
MX10016 Components and Configurations | 31
Installing the Mounting Hardware
An MX10016 router can be installed in a four-post rack or in an open-frame rack. Install the mounting
hardware on the rack before installing the router.
136