•
If you are returning the chassis:
•
A 13/32-in. or 10-mm open-end or socket wrench to install the bracket bolts on the chassis and
shipping pallet
•
An appropriate screwdriver for the mounting screws used on your rack
This topic covers:
Packing an MX10016 Chassis for Shipping
The MX10016 is shipped in a cardboard box that has a two-layer wooden pallet base with foam cushioning
between the layers. The router chassis is bolted to the pallet base with four pallet fasteners, two on each
side of the chassis. See Figure 127 on page 266 for the stacking configuration of the MX10016.
265
To Next Page
Loading...
