Table 7: Field-Replaceable Units in an MX10016 Router (continued)
TypeFRU
Hot-insertable and hot-removable.Optical transceivers
NOTE: Line cards are not part of the base or redundant configuration. You must order them
separately.
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/.
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace an existing component with the same type of component.
SEE ALSO
MX10016 Components and Configurations | 31
MX10016 Status Panel LEDs
The status panel of the MX10016 routers has two purposes:
•
Shows the overall status of the chassis
•
Indicates the type of power bus internal to the chassis
Starting in May 2019, new chassis ship with an enhanced power bus to support the power needs of higher
wattage line cards.
The status panel of the MX10016 shows the overall status of the chassis through a set of five bi-color
LEDs (see Figure 14 on page 40 for a chassis with the original power bus).
39