To pack and ship MX10016 components:
1. Place individual FRUs in antistatic bags.
2. Use the original packing materials if they are available. If the original packing materials are not available,
ensure the component is adequately packed to prevent damage during transit. The packing material
you use must be able to support the weight of the component.
3. Ensure that the components are adequately protected with packing materials and packed so that the
pieces are prevented from moving around inside the carton.
4. Close the top of the cardboard shipping box and seal it with packing tape.
5. Write the RMA number on the exterior of the box to ensure proper tracking.
269
To Next Page
Loading...
