Juniper MX10016 Hardware Guide

Table 12: Fan Tray Controller LEDs on an MX10016
DescriptionStateColorName
The fan tray controller has power and is
operating normally.
On steadilyGreenFan controller power
A power error has been detected in the
fan tray controller. Replace the fan tray
controller as soon as possible. To maintain
proper airflow through the chassis, leave
the fan tray installed in the chassis until
you are ready to replace the fan tray
controller.
BlinkingYellow
The fan tray controller is not powered on
or is not receiving power.
OffNone
The fan tray controller is online and is
operating normally.
On steadilyGreenFan tray controller status
The beacon feature is enabled. This feature
is enabled using the request chassis
beacon command.
BlinkingGreen
An error has been detected in the fan tray
controller. Replace the fan tray controller
as soon as possible. To maintain proper
airflow through the chassis, leave the fan
tray installed in the chassis until you are
ready to replace the fan tray controller.
BlinkingYellow
The fan tray controller is not receiving
power.
OffNone
RELATED DOCUMENTATION
Removing and Installing MX10016 Cooling System Components | 162
56

Juniper MX10016 Specifications

General

Brand	Juniper
Model	MX10016
Category	Network Hardware
Language	English