MULTICAL®603
KamstrupA/S∙Technicaldescription∙5512‐2029
A1_GB
06.2017
109
7.8 Transportstate
BeforeMULTICAL®603forthefirsttimehasregisteredaflowof1%ofq
p
orlarger,themeterisintransportstate.
Thetransportstateincludesthat:
- Noinfocodesaresavedinthemeter’sloggerandtheinfoeventcounterisnotactive.
- Apowersavingmeasuringsequenceisused.
- TheSETUPloopisavailable,whichenablesyoutoconfigure
themeterbeforecommissioning.
Note:Ingeneral,theSETUPloopisavailable,itcanhoweverbelimitedbytheselectedcountrycode.
BeawarethattheaccesstotheSETUPloopwillbeblocked
andthemeterwillleavetransportmodeiftheconfiguration
in the SETUP loop is ended by
the function “EndSetup”.
Whenthemeterhaslefttransportstate,infocodeswillbe
loggedandthemeasuringsequenceischangedtotheone
ordered for the meter (determined by the L‐code). The
metercannotreverttotransportstate,unlessatotalresetis
made. The access to the
SETUP loop can, however, be
opened again by separating calculator top and base. This
meansbreakingtheinstallationseal,seeparagraph4.6.
Radiocommunication
Ondelivery,themeterisintransportstateandthemeter’s
radiocommunicationisdeactivat ed.Theradioisactivated
whenthemeterforthefirst
timehasregisteredaflowof1
%ofq
p
orlarger.Intransportstateandaftercommissioning
ofthemeter,theradiocanbeenabledeitherviatheSETUP
loop or by making a forced dial‐up (both arr ow keys are
activateduntil“CALL”isdisplayed).Enablingtheradiodoes
notcausethemetertoleavethetransportstate.
Readmore
about deactivating radio communication in paragraph 6.3
abouttheSETUPloop.
Testmode
WhenaccessingtheTESTloop,radiocommunicationisdisabled.IntheTESTloop,flowwillnotactivatetheradio.
Note:InordertogainaccesstotheTESTloop,thetestsealmustbebroken,andthemetermustsubsequentlybere‐
verified.
To Next Page
