Keba KeDrive D3-DU 3 A Series - Page 84

D3-DU 3xx/A, /BOperating behavior
Project engineering manual V1.09
84
© KEBA 2021
1. Level 2. Level 3. Level 4. Level Description
D<n>-4
Service
Backup
Clone
Backup
Clone
<Location>
Cloning of the parameter sets to re-
store them when replacing the de-
vice
EoE must be enabled for this com-
mand.
Locations:
● local: on CFast card of the
control under root/appld-
isk/application/
drive/drive
● /media/usb<x>/drive:
on USB stick (x: number of the
USB port of the control)
Select
Clone
<Filename>
File selection
The following file names are valid,
where <n> is the index and <ip> is
the EoE IP address of the drive:
● DriveClone_<n>.tftp-
com
● Drive-
Clone_<n>[..].tftp-
com
● DriveClone_<ip>.tft-
pcom
Backup
Clone
Are you
sure?
Confirm execution
Backup
Clone
Backup
Clone...
Backup is performed
The following states can be dis-
played:
● Backup Clone Ok: Suc-
cessfully completed.
● Backup Clone Failed:
An error has occurred.
D<n>-4
Service
Restore
Clone
Restore
Clone
<Location>
Restoring the parameter sets on a
new device
EoE must be enabled for this com-
mand.
Locations:
● local: on CFast card of the
control under root/appld-
isk/application/
drive/drive
● /media/usb<x>/drive:
on USB stick (x: number of the
USB port of the control)
Restore
Clone
n.a.
No (valid) file was found in the di-
rectory.