7: TSP command reference Series 2600B System SourceMeter® Instrument
7-410 2600BS-901-01 Rev. C / August 2016
tspnet.write()
This function writes a string to the remote instrument.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
tspnet.write(connectionID, inputString)
The connection ID returned from
Details
The tspnet.write() function sends inputString to the remote instrument. It does not wait for
command completion on the remote instrument.
The Series 2600B sends inputString to the remote instrument exactly as indicated. The
inputString must contain any necessary new lines, termination, or other syntax elements needed
to complete properly.
Because tspnet.write() does not process output from the remote instrument, do not send
commands that generate too much output without processing the output. This command can stop
executing if there is too much unprocessed output from previous commands.
Example
tspnet.write(myID, "runscript()\r\n")
Commands the remote instrument to execute
a command or script named runscript() on
a remote device identified in the system as
.
Also see
tspnet.connect() (on page 7-400)
tspnet.read() (on page 7-403)
userstring.add()
This function adds a user-defined string to nonvolatile memory.
Type TSP-Link accessible
Affected by Where saved Default value
Function No
Usage
userstring.add(name, value)
The name of the string; the key of the key-value pair
The string to associate with
name
; the value of the key-value pair
To Next Page
Loading...
