Keithley 2600B User Manual

Section
6: Instrument programming Series 2600B System SourceMeter® Instrument Referenc
e Manual
6-52 2600BS-901-01 Rev. C / August 2016
Using the reset() command
Most TSP-Link
®
system operations target a single node in the system, but the reset() command
affects the system as a whole by resetting all nodes to their default settings:
-- Reset all nodes in a TSP-Link system to their default state.
reset()
Using the reset() command in a TSP-Link network differs from using the tsplink.reset()
command. The tsplink.reset() command reinitializes the TSP-Link network and may change
the state of individual nodes in the system.
Use node[N].reset() or localnode.reset() to reset only one of the nodes. The other nodes
are not affected. The following programming example shows this type of reset operation with code
that is run on node 1.
-- Reset node 1 only.
node[1].reset()
-- Reset the node you are connected to (in this case, node 1).
localnode.reset()
-- Reset node 4 only.
node[4].reset()
Using the abort command
An abort command terminates an executing script and returns all nodes to local operation (REM
indicators turn off). This dissolves the master/subordinate relationships between nodes. To invoke an
abort operation, either send an abort command to a specific node or press the EXIT (LOCAL) key
on any node in the system.
You can also perform an abort operation by pressing the OUTPUT ON/OFF control on any node. The
results are the same as above, with the addition that all source-measure unit (SMU) outputs in the
system are turned off.
Triggering with TSP-Link
The TSP-Link
®
expansion interface has three synchronization lines that function similarly to the digital
I/O synchronization lines. See Digital I/O (on page 3-82) and Triggering (on page 3-32
) for more
information.
TSP advanced features
Use the Test Script Processor (TSP
®
) scripting engine's advanced features to:
• Run test scripts simultaneously
• Manage resources allocated to test scripts that are running simultaneously
• Use the data queue to facilitate real-time communication between nodes on the TSP-Link
®
network
When test scripts are run simultaneously, it improves functional testing, provides higher throughput,
and expands system flexibility.

Keithley 2600B Specifications

General

Brand	Keithley
Model	2600B
Category	Measuring Instruments
Language	English