7: TSP command reference Series 2600B System SourceMeter® Instrument
7-4 2600BS-901-01 Rev. C / August 2016
Using the TSP command reference
The TSP command reference contains detailed descriptions of each of the TSP commands that you
can use to control your instrument. Each command description is broken into subsections. The figure
below shows an example of a command description.
Figure 119: Example instrument command description
The subsections contain information about the command. The subsections are:
• Command name and summary table
• Usage
• Details
• Example
• Also see
The content of each of these subsections is described in the following topics.
Command name and summary table
Each instrument command description starts with the command name, followed by a table with
relevant information for each command. Definitions for the numbered items in the figure below are
listed following the figure.
Figure 120: Command name and summary table
To Next Page
Loading...
