5: Introduction to TSP operation Series 2600B System SourceMeter® Instrument
5-10 2600BS-901-01 Rev. C / August 2016
localnode.passwordmode (on page 7-154)
Miscellaneous
delay() (on page 7-53)
exit() (on page 7-96)
localnode.autolinefreq (on page 7-150)
localnode.linefreq (on page 7-152)
localnode.password (on page 7-153)
localnode.passwordmode (on page 7-154)
makegetter() (on page 7-159)
makesetter() (on page 7-159)
meminfo() (on page 7-160)
opc() (on page 7-163)
waitcomplete() (on page 7-413)
Parallel script execution
dataqueue.add() (on page 7-49)
dataqueue.CAPACITY (on page 7-50)
dataqueue.clear() (on page 7-51)
dataqueue.count (on page 7-51)
dataqueue.next() (on page 7-52)
node[N].execute() (on page 7-161)
node[N].getglobal() (on page 7-162)
node[N].setglobal() (on page 7-162)
tsplink.group (on page 7-382)
tsplink.master (on page 7-383)
tsplink.node (on page 7-383)
Queries and response messages
You can use the print(), printbuffer(), and printnumber() functions to query the
instrument and generate response messages. The format attributes control how the data is formatted
for the print functions used.
The localnode commands determine if generated errors are automatically sent and if prompts are
generated.
format.asciiprecision (on page 7-101)
format.byteorder (on page 7-101)
format.data (on page 7-102)
localnode.prompts (on page 7-154)
localnode.prompts4882 (on page 7-155)
localnode.showerrors (on page 7-158)
print() (on page 7-165)
printbuffer() (on page 7-166)
printnumber() (on page 7-169)
To Next Page
Loading...
