System SourceMeter® Instrument Reference Manual Section 5:
Introduction to TSP operation
2600BS-901-01 Rev. C / August 2016 5-15
Status model
The status model is a set of status registers and queues. You can use the following commands to
manipulate and monitor these registers and queues to view and control various instrument events.
status.condition (on page 7-275)
status.measurement.* (on page 7-277)
status.measurement.buffer_available.* (on page 7-279)
status.measurement.current_limit.* (on page 7-280)
status.measurement.instrument.* (on page 7-282)
status.measurement.instrument.smuX.* (on page 7-283)
status.measurement.reading_overflow.* (on page 7-286)
status.measurement.voltage_limit.* (on page 7-287)
status.node_enable (on page 7-288)
status.node_event (on page 7-290)
status.operation.* (on page 7-292)
status.operation.calibrating.* (on page 7-294)
status.operation.instrument.* (on page 7-295)
status.operation.instrument.digio.* (on page 7-298)
status.operation.instrument.digio.trigger_overrun.* (on page 7-300)
status.operation.instrument.lan.* (on page 7-302)
status.operation.instrument.lan.trigger_overrun.* (on page 7-304)
status.operation.instrument.smuX.* (on page 7-306)
status.operation.instrument.smuX.trigger_overrrun.* (on page 7-308)
status.operation.instrument.trigger_blender.* (on page 7-310)
status.operation.instrument.trigger_blender.trigger_overrun.* (on page 7-311)
status.operation.instrument.trigger_timer.* (on page 7-314)
status.operation.instrument.trigger_timer.trigger_overrun.* (on page 7-316)
status.operation.instrument.tsplink.* (on page 7-318)
status.operation.instrument.tsplink.trigger_overrun.* (on page 7-319)
status.operation.measuring.* (on page 7-321)
status.operation.remote.* (on page 7-323)
status.operation.sweeping.* (on page 7-324)
status.operation.trigger_overrun.* (on page 7-326)
status.operation.user.* (on page 7-328)
status.questionable.* (on page 7-330)
status.questionable.calibration.* (on page 7-332)
status.questionable.instrument.* (on page 7-334)
status.questionable.instrument.smuX.* (on page 7-335)
status.questionable.over_temperature.* (on page 7-337)
status.questionable.unstable_output.* (on page 7-339)
status.request_enable (on page 7-340)
status.request_event (on page 7-342)
status.reset() (on page 7-344)
status.standard.* (on page 7-344)
status.system.* (on page 7-347)
status.system2.* (on page 7-349)
status.system3.* (on page 7-351)
status.system4.* (on page 7-353)
status.system5.* (on page 7-355)
To Next Page
Loading...
