170 | 13 Global menus and settings
Global options:
• Global Tune: allows to fine-tune the unit in hundredths of semitones (100 cents
include a semitone). The range is from -100 cents to +100 cents. The factory value
of this parameter is 0.
• Mod. Sensitivity: resizes the input MIDI messages of the Modulation Wheel (MIDI
CC 1 and MIDI CC 33) by multiplying the received value by a weight coefficient.
The factory value of this parameter is 127 (full scale).
AFTERTOUCH options:
• Curve: set the AFTERTOUCH curve values between NORMAL, OPEN, and CLOSE.
• Sensitivity: reduces the pressure messages of the incoming MIDI channel
(AFTERTOUCH) by multiplying the received value by a weight coefficient. The
factory value of this parameter is 127 (full scale).
• Threshold: sets the value above which AFTERTOUCH could trigger Morphing,
Rotor or LFO values (AFTERTOUCH controls must be enabled in VOICE EDIT.
LIVE DRUMSET options:
• On/Off: Enable Wave Cycling on drums to increase the realism of sounds by not
repeating the same samples on each measure but cycling through various samples
e.g. using multiple SNARE samples to replicate the authentic snare drum which
never sounds the same way when hit twice.
Output Volume Level Options:
• MAIN LEVEL: Check the volume of the main output OUT and auxiliary outputs.
• MUTE: The main audio output can be muted.
Headphone Volume level options:
• HEADPHONE LEVEL: Control the output volume to stereo headphones. Factory
value is 90.
• MUTE: The headphone audio output can be muted.
EXPR. PEDAL options:
• LEFT/STYLE: Enable or disable volume control with the volume expression pedal
for the LEFT parts of the keyboard and accompaniment styles.
• PLAYER: Activate or de activate the volume control with the volume expression
pedal for backing tracks with PLAYER and STEM.
• Pedal Curve: Set the curve to apply to messages generated by the volume pedal to
distribute the high and low values over different ranges of controller positions.
Touch button and use the values dial to choose between NORMAL, SMOOTH,
FAST, CLOSE1, CLOSE2 and CLOSE3. The default is NORMAL.
To Next Page
Loading...
