80 | 07 Registration, Playbox, Performance
• Press Save to save to the current active location (e.g. if you just loaded a
registraton and wanted to tweek and then save back to the same registration
without renaming it).
• Press Save As to save to a memory location or bank other than the current one
(e.g. a new registration or if you want to rename the current selected one). The
instrument will ask you to name the new Registration.
• Press Cancel to cancel the operation. Nothing will be saved.
Expert advice
When you save a Registration, the instrument stores the current configuration parameters
of the instrument of the keyboard. However, if you want to exclude certain parameters from
being loaded (e.g. Midi or footswitch set up which you want to be consistent throughout as
you switch between registrations), you can customize EVM via Registration Setup and
determine which parameters are to be restored automatically from the stored Registration
and which are not (to remain global settings for example).
Saving more resources within a Registration
All discussed so far is not all a registration can do it is also possible to attach multimedia files
to each Registration to make the experience of using the instrument quick, complete and
wide, especially live.
• If you have the PDF score or image (JPG, PNG) of a song: you can load it at the
same time as you load it’s corresponding registration and read the score during
the performance.
• Let’s say you have saved the lyrics of the song to sing or some personal notes in a
text file. This document can also be instantly recalled from the Registration and
displayed on the screen.
• A Registration can also be used to open music tracks already recorded, in MIDI file
format or in audio format, ready to be played in real time with the setting of the
instrument most congenial for you.
To associate or link Registrations to these types of files above ... and more:
1. Load a Registration and select the bank (1, 2, 3 or 4) where you want to store the
final registration.
2. Go to PLAYER or MEDIA mode and load/open any file (PDF, TXT, JPG, PNG, MP3,
WAV).
3. From that same screen (you do not need to be in Registration mode) press the
SAVE button on the panel and select REGISTRATION as we have seen above (it
should be yellow).
To Next Page
Loading...
