13 Global menus and settings | 165
Options:
• Select WAVE/FADE IN START, LOOP/FADE OUT START or LOOP END and then use
the UP/DOWN buttons to move the START or END point manually.
• SEARCH FOR ZERO CROSSING: If active (ON), selecting a loop point is positioned
at the crossing for zero.
• ACCURACY: is the level of accuracy, of how many samples it moves in the selection
of loop points.
Buttons at the bottom of the screen:
Functions:
• AUTO LOOP: Calculates START/END automatically. The Autoloop function can last
up to 90 seconds.
• CROSSFADE: Performs cross fade in the loop area. If the loop point is close to the
END point it is convenient to change the CROSSFADE points. Creating good loops
requires time and patience and numerous trials. The AUTOLOOP and CROSS FADE
functions help the user, but they are not always decisive.
• FADE IN: The sample fades.
• FADE OUT: The sample ends in fading.
• NORMALIZE: Apply the same level increase to the entire duration of the sample.
• SILENCE: Apply silence.
• RESET: Restores the original sample.
Press the EXIT button on the panel to return to the previous page.
Saving an INSTRUMENT
Press the SAVE button on the panel to store the instrument currently in EDIT inside the
machine's internal flash memory. If the AUTO EXPORT option is enabled, you will find a .MS3
file in the /INSTRUMENT folder.
The saving can take some time, the duration is proportional to the number of splits.
Preferences
This page displays the operating system version of EVM.
To Next Page
Loading...
