13 Global menus and settings | 179
Sound Banks
Press the MENU button on the panel and the SOUND BANK button to access the USER
SOUND BANK management page and the reset of sounds and factory parameters.
Options:
• USER SOUND: Select this button and then touch the USER sounds on the left side
of the screen to load the sound bank. A window appears on the screen to which
you can answer EXIT to leave or YES to confirm the upload.
• FACTORY SOUND: Restore factory sounds. Once the function is selected, the LOAD
PCM DSP button appears at the bottom left: press it to confirm the reset.
• FACTORY PARAM.: Resets factory parameters. Once the function is selected, the
LOAD PARAM DSP button appears at the bottom left: press it to confirm the reset.
• DSP SOUND CHECK: This may take a few minutes.
• CLEAR ALL SOUNDS: Erases all Sound Bank instruments from flash memory.
(formatting).
Once a Sound Bank is loaded, you can call up the INSTRUMENTS:
• Voices: Once the sounds contained within the Sound Bank are saved, they are
visible in the GM sound lists and displayed in the assigned family. They can then
be treated like any GM sound and assigned to vocals or parts of tracks in styles or
MIDI files. The bench number is 95 and individual incremental Program Changes
range from 1 to 128.
• Drum sets: These are visible in the Drum list and can be assigned to styles or MIDI
files.
To Next Page
Loading...
