15 Media | 203
Refresh
The Refresh operation scans all connected memory devices. It is useful when the instrument
does not immediately recognize a connected USB stick or external hard drive.
1. Press the MEDIA button on the panel.
2. Touch REFRESH on the screen.
3. Any unrecognized devices will finally be detected and listed on the screen.
4. If not, disconnect the devices in a controlled manner and restart EVM. When the
power is complete, try connecting the devices again. If they do not appear, change
devices or switch to the FORMAT function on the INFO page (see the paragraph
just before this).
To Next Page
Loading...
