06 Stem | 73
REAL DRUMS: when an audio file is loaded with the information about Tempo in
the name, the Tempo of the Stem is set to the one of those tracks.
4. Press the TRANSPOSE +/- buttons on the panel to change the pitch of the audio
tracks (fixed tracks will not be affected by transposition).
5. Press one of the SCENES buttons on the screen to load another scene. The scene
changes at the end of the current measurement. You can change scenes by
pressing the A, B, C and D buttons on the panel.
6. Press the LEAD button on the panel to deactivate or reactivate the main track.
7. Use the sliders in the panel to adjust the volume of audio tracks as follows:
o Slider PLAYER: global volume of the Stem project.
o Slider DRUM: track linked to Pad Lead.
o Slider BASS: track linked to Pad 1.
o Slider CHORD: track linkedto Pad 2.
o Slider REAL CHROD: track linked to Pad 3.
o Slider LOWER: track linked to Pad 4.
Creating a Stem project
How to create a new Stem project:
1. Press the NEW button on the screen.
2. A pop-up window appears on the screen asking you to confirm that you delete the
current scenes: press Yes to continue (pressing No, you will stop the creation
process).
3. Touch and hold a Pad to load an audio file there. The list of all available audio files
will appear on the left. Touch name to load the track. Press the EXIT button on the
panel to close the track selection windows.
4. Repeat all operations for all affected Pads.
5. If one or more drums tracks have been charged, touch FIXED button on the screen
and then the Pads corresponding to the drums track to make them unalterable by
transposition.
6. Adjust the track volumes: touch LEVEL button on the screen, touch Pad
corresponding to the desired track and then UP/DOWN buttons.
To Next Page
Loading...
