74 | 06 Stem
7. Repeat this step for the other scenes. Touch SCENE 1, SCENE 2, SCENE3, and
SCENE 4 buttons to switch scenes.
8. At the end, press the SAVE button on the panel. Touch SAVE AS button to name
your Stem project. A virtual alphanumeric keyboard will appear on the screen. Dial
the new name and then press the ENTER key on the panel. Press the CANCEL
button or press EXIT to cancel the operation.
9. In the SAVE window, press the REGISTRATION button to save the Stem project as
a recording.
Please note:
• We suggest including the BPM value of the audio track at the end of the file name
(for example, a file named Sax_120.wav).
• Once you have saved a Stem project, you can upload it by tapping the LOAD
button: the list of all Stem projects will appear on the left. Touch name to upload
the project.
• If you save a .txt file with the same name in the same folder as your Stem project,
the text file will appear as LYRIC when a Stem project is uploaded, as described in
Link texts.
Expert advice
• Stem project files have the .stm extension.
• All audio files used in Stem projects are necessarily saved in a dedicated location
on the internal SSD: /media/back/STEM/WAVE/.
• The only recognized format is WAV with 16-bit resolution and sample rate of
44,100Hz.
To Next Page
Loading...
