172 | 13 Global menus and settings
1. Simply touch any of the switches: The screen displays a list of available functions
(check the table with the full list below).
2. Touch the UP/DOWN buttons.
3. Touch the function needed to assign the function to the switch.
4. Press the EXIT button on the panel to close the pop up.
5. You can store and recall up to four different function configurations within 4 sets.
Each configuration assigns each switch a different function. Touch the SET icons to
select a configuration for each one.
6. Press the SAVE button on the panel to save the current configuration.
7. Touch the DEFAULT icon to reload the default factory configuration.
Programmable Footswitch functions
To Next Page
Loading...
