07 Registration, Playbox, Performance | 83
remove the numbering using the REMOVE button of the NUMBER ASSIGNin the
Disk Edit page).
o Touch a virtual Pad to immediately open the associated style or
Registration (does not require the START button on the start panel).
o The same goes for Registration associated with songs.
o From here on, the control of style playback depends on the ABCD, Break,
Fill, and Ending controls.
o If you touch another virtual Pad, the associated style or song in the
Registration starts instead of the previous playback.
• At the bottom of the screen, the buttons links to the Set collections.
o Touch a SET button to load all the songs in it.
o To add songs to a SET collection, copy the styles and Registrations to the
folder linked to that SET, using file operations provided in Disk Edit or
Connect to PC/Mac. Alternatively, you can open styles or Registrations and
by activating the Save Process (SAVE) define that the asset should be stored
in a Performance location.
o Touch and hold a SET button to change the path of the folder linked to that
collection, as we saw done above for the JUKEBOX function.
In the Performance page, by pressing the SAVE button on the panel, you can store a single
Registration, a Multi or a User Style directly in the current SET folder. If you selected the style
in the top bar, Performance saves the style, otherwise it saves the Voice.
To exit the Performance function, press the EXIT button on the panel.
To Next Page
Loading...
