Keysight N6900/N7900 Series Operating and Service Guide
6
SCPI Programming
Reference
Introduction to the SCPI Language
Commands by Subsystem
Command Quick Reference
Reset State (*RST)
SCPI Error Messages
Compatibility Commands
IO Libraries and Instrument Drivers
The Keysight IO Libraries Suite software is provided on the Keysight Automation
Ready CD-ROM provided with your instrument. You can also download the
Keysight IO Libraries Suite software, along with IVI-COM and LabVIEW drivers
from the Keysight Developer Network at www.keysight.com/find/adn.
For detailed information about interface connections, refer to the Keysight
USB/LAN/GPIB Interfaces Connectivity Guide, located on the Automation-
Ready CD. Or download the guide at www.keysight.com/find/connectivity.
Web Interface
The APS provides a Web interface that is built into the instrument. You can use
this interface over LAN for remote access and control of the instrument via a
Web browser. See Using the Web Interface for details.
Example Programs
There are several example programs on the product page Web site at
www.keysight.com/find/APS. These are application-focused programs that
demonstrate different programming environments.
To Next Page
Loading...
Need help?
General
