To Next Page

To Previous Page

MEASure Subsystem

Measure commands measure the output voltage or current. They trigger the acquisition of new data

before returning the reading. Measurements are performed by digitizing the instantaneous output

voltage or current for a specified measurement time, storing the results in a buffer, and calculating the

value for the specified measurement type.

MEASure

[:SCALar]

:CURRent

[:DC]? Takes a measurement; returns the averaged current.

:ACDC? Takes a measurement; returns the RMS current (AC + DC).

:HIGH? Takes a measurement; returns the High level of a current pulse.

:LOW? Takes a measurement; returns the Low level of a current pulse.

:MAXimum? Takes a measurement; returns the maximum current.

:MINimum? Takes a measurement; returns the minimum current.

:POWer

[:DC]? Takes a measurement; returns the averaged power.

:MAXimum? Takes a measurement; returns the maximum power.

:MINimum? Takes a measurement; returns the minimum power.

:VOLTage

[:DC]? Takes a measurement; returns the averaged voltage.

:ACDC? Takes a measurement; returns the RMS voltage (AC + DC).

:HIGH? Takes a measurement; returns the High level of a voltage pulse.

:LOW? Takes a measurement; returns the Low level of a voltage pulse.

:MAXimum? Takes a measurement; returns the maximum voltage.

:MINimum? Takes a measurement; returns the minimum voltage.

:ARRAY

:CURRent

[:DC]? Takes a measurement; returns the instantaneous current.

:POWer

[:DC]? Takes a measurement; returns the instantaneous power.

:VOLTage

[:DC]? Takes a measurement; returns the instantaneous voltage.

MEASure[:SCALar]:CURRent[:DC]?

MEASure[:SCALar]:VOLTage[:DC]?

MEASure[:SCALar]:POWer[:DC]?

Initiates, triggers, and returns the averaged output measurement. Values returned are either in

amperes, volts, or watts.

Keysight N6900/N7900 Series Operating and Service Guide 244

6 SCPI Programming Reference

Keysight Technologies N6900 Series User Manual

Questions and Answers: